PRS, Bel RX65, Radar Detector, M27 Laser Jammer Installation

Easy to Install

The Beltronics RX65 comes complete with a comprehensive owner's manual, quick release windshield mount, built in earphone jack, a coiled SmartCord, quick reference card, and a Beltronics black travel case. Beltronics RX65 is easily located just under and behind the rear view mirror

WHERE IS THE LASER JAMMER INSTALLED?

The Blinder M27 is located in the grille to detect laser guns where they aim the laser beam on the headlights, grille and license plate. The laser beam can be 6” wide (at 300 feet) to 36” wide (at 1500 feet). Most police aim laser at a vehicle between 300 and 700 feet.

Using the Blinder M27, two laser jammer modules provide front coverage on your license plate, bumper and headlights. Install two front modules or two in the rear of the vehicle.. The laser jammers will detect the laser beam, block the speed reading, giving you time to adjust your speed before you turn the laser jammers off to let them detect your speed - after you have slowed down.

Installation/Tips

The Beltronics RX65 radar detector is quickly located in the windshield by attaching the metal bracket supplied in the package, and then pressing the two vacuum cups at the desired position on the windshield. I think the best location is just below the rear view mirror and slightly to the left, for easy reach with your right hand. The Beltronics RX65 radar detector display faces straight back, making it easy to view by left hand and right hand drivers.

The Blinder M27 laser jammer provides a plug and play installation. All modules connect into the interface module using telephone jack connections. The only hardwire requirements is the 12Vdc wire and ground. Everything else is plug and play with telephone jack connections. Pay attention to the installation quide for level installation to achieve maximum performance.