Beltronics RX75 Dual Remotes, M45 and M25 Test Results

Laser Detection/Jamming Performance Test		Comments	Rating
1	Where is the product installed on the vehicle?	Grille
2	Can it Jam all Laser guns at 1500 feet or more?	Yes
3	Does it "Jam to Gun" all Laser Guns?	Yes
4	Is there Punch Through weakness under 500 feet?	No
5	Does the Laser Jammer leave jamming codes?	Very Few
6	Does the Laser Jammer alert to False Noise?	Some
7	Does the Laser module install on the license plate?	No
8	Does the Interface Provide easy Power Off?	Yes
9	Are there additional Useful Features to the driver?	Self Test
10	What is overall Laser Jammer Performance Rating?	Superb

The Blinder M45 Laser Jammer installed into the front grille is so good that no laser gun can penetrate its protection. As you drive down the road and get a laser alert, you know the laser gun is not reading your speed. Calmly adjust your speed, typically about 2 seconds, no jamming on the brakes; and when you achieve the desired speed, shut the Blinder Laser Jammer off, allowing the laser gun to read your ADJUSTED speed. You were able to slow down, and the laser gun was able to read your speed, which is important. It is not necessary to "Jam to Gun" (jam all the way from 1st alert to the laser gun), even though the Blinder M45 Laser Jammer can do so. If you get a rear laser alert from the Blinder M25 laser jammer, let the laser blocker protect your speed, as you let off the gas. Try not to use your brakes, as anyone can see the brake lights behind you. After you adjust your speed, shut your Laser Blinder off, which allows your speed to be detected. Both Products tested by speed Measurement Labs provided the very best results available.