Beltronics RX65 provides these radar detector specifications
Operating Bands
X-band 10.525 GHz ± 25 MHz
K-band 24.150 GHz ± 100 MHz
K-band POP 3, 24.150 GHz ± 100 MHz
Ka-band 33.800 GHz ± 200 MHz
Ka-band 34.600 GHz ± 200 MHz
Ka-band 34.700 GHz ± 200 MHz
Ka-band 35.500 GHz ± 200 MHz
Ka POP3 band
Laser 904nm, 33 MHz bandwidth
Radar Receiver / Detector Type
Superheterodyne, GaAs FET VCO
Varactor Tuned Antenna
Scanning Frequency Discriminator
Digital Signal Processing (DSP)
Laser Detection
Quantum Limited Video Receiver
Multiple Laser Diodes
Display Type
280 LED Alphanumeric, RED
Bar Graph, Threat Display, or Tech Display
3 Levels of Brightness, plus Dark Mode
Power Requirement
12VDC, Negative Ground
SmartPlug (included)
Sensitivity Control
Highway, AutoScan and City
Auto Calibration Circuitry
100% Immunity to VG-2 and VG4 RDD
Dimensions (Inches) · 1.25 H x 2.75 W x 4.75 L
DRIVER SELECTABLE FEATURES
1. Power-on indication
2. Voice alerts on or off
3. Power-on sequence
4. Signal strength meter display
5. AutoMute on or off
6. City mode sensitivity
7. Radar/Laser bands on or off
LASER JAMMER SPECIFICATIONS, Blinder M27
Operating LED Infrared Wavelength
850 - 920 nanometers (Infrared and Lidar)
Power Use
250 mA typical standby
1000 mA maximum alarm condition
Dimensions of each laser module
1.9 in. D x 4.0 in. W x 0.75 in. H
Weight
7 ounces, each laser module
Temperature Range
Operating: -20°C to +50°C
Storage: -30°C to +85°C
Power Requirements
11.0-16.0 Volts DC negative ground
